beautiful clock rainmeter skin for your desktop background

simple and beautiful clock rainmeter skin for your desktop background

 

Free customized rainmeter skin for your desktop background

Guys, Here is another customized rainmeter skin with wallpaper,

Ingredients of this screenshot :

 Wallpapers

skin of date and time

Procedure to install this rainmeter skin:

1. First download these ingredients with wallpaper in single rar file:  
Click here to download

2.Now extract the downloaded rar file,  

3. And now install the rainmeter software,

4. After installing rainmeter, now go to C:\Documents and Settings\Administrator\MyDocuments\Rainmeter\Skins and paste the extracted file in Skins folder  

5. Now open the rainmeter and right click on any skin and select "mange skin" option, now u can load the rainmeter skin and enjoy......

Read more »

How to use your pendrive as a RAM in windows XP and windows 7...

Do you want to use your pen drive as ram

Do you want to increase your ram using your pen drive

Then here is the process to speed up your computer by using pendrive as a ram for WINDOWS XP :


Follow these easy steps:-


Step 1: First connect your pen drive to your System [pen drive should be at least 1 GB or if you having 4 GB then its better


Step 2: Allow System what it is supposed to do after connecting pendrive, let system to detect pen drive

Step 3: After your System finished with its detection work, now you have to do some little work

Step 4: Do Right click on the "My Computer" and select the "properties" option

Step 5: Now go to "advanced" and then in "performance" tab, go to "settings"

 Step 6: now select "advanced" tab and then select "Change" option of virtual memory as shown in the image below,

 Step 7: Select pen drive and click on custom size " Check the value of space available in pendrive "


Step 8: Now Enter the same value in the Initial and the Max columns and then click on set

Now Restart your pc and check the general start up time and also speed of your system 

so that you can have a high speed system at low cost.....    Enjoy!

For Windows 7  the process is,


1. Plug in your pendrive-> Format with NTFS or FAT32
 
2. Now go to properties->Select ReadyBoost
 
3. Check Use this device->Choose maximum space to reserve system speed
 
4. Click on Apply and OK. Your readyboost PenDrive is ready to use now.

Here is an personal suggestion HP and Sandisk is the Best for this work.

Read more »

Internet Download Manger (IDM) full version life time with crack tool and without any serial

internet download manager (idm full version) with life time activation

 

IDM full version lifetime activation with crack tool

 Hi Guys, here is the post for activating IDM fullversion with crack tool,

So, I will explain today how to activate IDM for life time...And it is done by crack tool easily, 100% working..

Try these simple steps to activate IDM for lifetime..

Follow the instructions below:-

1. Install any old or current version of IDM

2. And then open the "IDM crack for life.exe",Download the "IDM crack for life.exe" from below link,

                                       Click here to download : "IDM crack for life.exe"

3. Click on the update button as shown in the image below

4. Now open the IDM, go to the option Help > check for updates and update the software

5. And now open IDM crack for life.exe again and click on the "START" button to make the new updated IDM full version as shown in the  Image below.

6. After completing the above all steps, open IDM, go to HELP option and in that click "About IDM",

    you will see like the image below, So now you have activated full version for your IDM...

NOTE:  After activating this trick never update the IDM software....

Thank u..... if any doubts feel free to comment...

Read more »

Beautiful room rainmeter skin for your desktop background

beautiful room customized rainmeter skin for your desktop background

 

Free customized rainmeter skin for your desktop background

Guys, Here is another customized rainmeter skin with wallpaper,

I have mixed the stuff of few rainmeter skins,

Here is the ingredients of this screenshot :

Wallpaper

winamp player

calendar

date and time

weather

system info

google search

Procedure to install this rainmeter skin:

1. First download these ingredients with wallpaper in single rar file:

                                                       Click here to download

                                                        

2. Now extract the downloaded rar file,

3. And now install the rainmeter software, you can download the rainmeter from here

Click here to download rainmeter

4. After installing rainmeter, now go to C:\Documents and Settings\Administrator\MyDocuments\Rainmeter\Skins and paste the extracted file in Skins folder

5. Now open the rainmeter and right click on any skin and select "mange skin" option, now u can load the rainmeter skin of your choice and enjoy...

thank u...

Read more »

change the default location for installing applications

how to change the default location for installing applications

 

change the default location for installing applications from C drive to any drive  

when the c drive is full you can change the default location of installing applications by this process,

 As the size of hardrives increase, more people are using partitions to separate and store groups of files.

XP uses the C:\Program Files directory as the default base directory into which the new programs are installed,

Here, you can change the default installation drive and or directory by using a Registry hack

Run the Registry Editor, go to run option and enter regedit

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

Look for the value named ProgramFilesDir. by default, this value will be C:\Program Files. Edit the value to any valid drive or folder and XP will use that new location as the default installation directory for new programs.

now the location of installed applications will be changed to your choice....

thank u....

Read more »

Bottle ship rainmeter skin for your desktop background

download bottle ship rainmeter skin for your desktop background

 

bottle ship rainmeter skin free download 

Wanna have this background on your desktop with this rainmeter skin utilities, then here is the process:

This screenshot contains mixture of some different rainmeter skins,

Screenshot  ingredients:

 Time gadget

dawn rm bar

don draper skin

wallpaper changer bar

ship in bottle wallpaper

Download the above ingredients in one folder: 

CLICK HERE TO DOWNLOAD

After downloading the file you can install these skins through rainmeter and enjoy......

Thank u...

Read more »

Crack any version of internet download manager (IDM) to full version

Crack any version of internet download manager to full version

 

Crack  any version of idm to idm full version

( IDM ) is the best download manager all we know but they are just providing the trial version for 1 month and after that IDM will ask for the serial key....

But the original serial key for IDM will not work, because whenever we enter its serial key it will verify with its database. So, we need to crack it manually....

Then here is the process for cracking IDM manually in windows XP:

1. Go to C:\Windows\System32\drivers\etc now you can see some files there and now open the hosts file with notepad.

2. Here you can see the file how it looks like after opening it with notepad

3. Now paste the below code in the notepad just after the 'localhost'

127.0.0.1 tonec.com

127.0.0.1 www.tonec.com

127.0.0.1 registeridm.com

127.0.0.1 www.registeridm.com

127.0.0.1 secure.registeridm.com

127.0.0.1 internetdownloadmanager.com

127.0.0.1 www.internetdownloadmanager.com

127.0.0.1 secure.internetdownloadmanager.com

127.0.0.1 mirror.internetdownloadmanager.com

127.0.0.1 mirror2.internetdownloadmanager.com

4. And after that open IDM and enter the below registration serial key

HUDWE-UO689-6D27B-YM28M

and click ok and then you have done...!

you can see my full version of IDM 

Here is the process for cracking IDM manually in windows 7:

1. As usually Go to C:\Windows\System32\drivers\etc now you can see some files there and now Right click on hosts file and select security tab  

2. Now select USERS after that click on EDIT 

3. You can see one dialog box will open and in that select users 

4. Now you can see we don’t have write permission now just select full control.

5. After that just simply click OK 

6. And one dialog box will open in that just press yes

7. Now you can save hosts file in windows 7. and after that add this serial key. 

 HUDWE-UO689-6D27B-YM28M

and click ok and then you have done...!

you can see my full version of IDM 

thank u and enjoy...

Read more »

Free desktop background with rainmeter skin

Free desktop background with rain meter skin
 

   Want to have this desktop background

     Then here is the process to get this desktop background:

1. Download the RAINMETER software from here: Click here to download rainmeter

2. Next download the skin of the rainmeter from here, you can get these wallpaper in this folder only:

                                Click here to download the skin 

3. Now install the rainmeter and next unzip the folder of rainmeter skin, there you can get the wallpaper and skin to apply......

apply the skin to rainmeter and enjoy

thank u....

Read more »

how to change your ip address in less than 1 minute

how to change ip address in less than 1 minute

Change ip address without any software..

Here's the process to change your ip address:

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address...

With a little practice, you can easily get this process down to 15 seconds. 

Note:  This is only for education purpose, not for hacking purpose
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back...

Read more »

How to get direct download links from google with one cllick

How to get direct download links of apps, games, movies, music and many more from the Google...

Get direct download links of apps, games, movies, music and many more from the Google by using this trick... 

When we search for certain wanted file to download in Google it shows many links and many unwanted stuff, 
Then today this post will show you that how to get direct download links from Google search engine. By applying this trick you can get the direct downloads in just one click from Google search engine....

Here the process to apply this trick:

If you want movies and games/mp3 / games and dont' know where to get them, thank god there is Google.com,

Now go to google.com 

put this string in search bar of the google

for example: If you want the games, put this string in search bar like this

"parent directory " Gamez prince of persia -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

in place of "prince of persia" just u need to replace your needed game name..

For any application: put this string in search bar like this

 "parent directory " /appz/ -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

For any Music downloads:

"parent directory " Name of Singer or album -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

and other strings...

"parent directory " DVDRip -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

"parent directory "Xvid -xxx -html -htm -php -shtml -opendivx -md5 -md5sums

Like this you can get any direct links to download by applying this string in google search engine...

notice that i am only changing the word after the parent directory, change it to what you want and you will get lots of goods.

 Thank u...

Read more »

How to delete administrator password of ur pc without any software...

How to delete administrator password of ur pc without any software...

Delete your computer administrator password without any software


Here is the detailed process for "Deleting administrator Password" of ur PC without any software


Method 1
Boot up with DOS and delete the sam.exe and sam.log files from
Windows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password).
This solution works only if your hard drive is FAT kind. Method 2 Step

Step 1. Put your hard disk of your computer in any other pc .
Step 2. Boot that computer and use your hard disk as a secondary hard disk (D'nt boot as primary hard disk ). Step Step 3. Then open that drive in which the victim’s window(or your window) is installed.
Step 4. Go to location windows->system32->config
Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer :-)

Read more »

How to hack / change your start button in Windows XP Professional ...

We read a number of articles on the internet about changing the text on the Start button in XP. On more than one occasion I’ve seen references to a five (5) letter limitation when the button is renamed. I always wondered if this was true or just an assumption someone made because the default ‘start’ just happened to fit the button size. So, I decided to run a test and see if there really was a five character limit.

As you can see from the screen capture above it would seem that the five character limit isn’t etched in stone. The button expanded to accept the text I entered with no problem. I’ve been using the system for a few weeks now with no adverse effects. That’s not to say I won’t discover something down the road a bit, but for now I feel comfortable with the changes. If you’d like to try the procedure I used, the instructions follow.

Step 1 – Modify Explorer.exe File

In order to make the changes, the file explorer.exe located at C:\Windows needs to be edited. Since explorer.exe is a binary file it requires a special editor. For purposes of this article I have used Resource Hacker. Resource Hacker^TM is a freeware utility to view, modify, rename, add, delete and extract resources in 32bit Windows executables and resource files (*.res). It incorporates an internal resource script compiler and decompiler and works on Win95, Win98, WinME, WinNT, Win2000 and WinXP operating systems. download Resource Hacker that can get in google by searching.

The first step is to make a backup copy of the file explorer.exe located at C:\Windows\explorer. Place it in a folder somewhere on your hard drive where it will be safe. Start Resource Hacker and open explorer.exe located at C:\Windows\explorer.exe as shown in Fig. 01.

The category we are going to be using is String Table. Expand it by clicking the plus sign then navigate down to and expand string 37 followed by highlighting 1033. If you are using the Classic Layout rather than the XP Layout, use number 38. The right hand pane will display the stringtable as shown in Fig. 02. We’re going to modify item 578, currently showing the word “start” just as it displays on the current Start button.

There is no magic here. Just double click on the word “start” so that it’s highlighted, making sure the quotation marks are not part of the highlight. They need to remain in place, surrounding the new text that you’ll type. Go ahead and type your new entry. In my case I used ElderGeek as shown in Fig. 03.

Compare the screen captures in Fig. 02 and Fig. 03 and you’ll notice that after the new text string has been entered the Compile Script button that was grayed out in Fig. 02 is now active in Fig. 03. I won’t get into what’s involved in compiling a script, but suffice it to say it’s going to make this exercise worthwhile. Click Compile Script and then save the altered file using the Save As command on the filemenu. Do not use the Save command – Make sure to use the Save As command and choose a name for the file. See Fig. 04. Save the newly named file to C:\Windows.

 Step 2 – Modify the Registry

Now that the modified explorer.exe has been created it’s necessary to modify the registry so the file will be recognized when the user logs on to the system. If you don’t know how to access the registry I’m not sure this article is for you, but just in case it’s a temporary memory lapse, go to Start (soon to be something else) Run and type regedit in the Open: field. Navigate to:

 HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon

In the right pane (Fig. 05), double click the Shell entry to open the Edit String dialog box as shown in Fig. 06. In Value data: line, enter the name that was used to save the modified explorer.exe file. Click OK.

Close Registry Editor and either log off the system and log back in, or reboot the entire system if that’s your preference. If all went as planned you should see your new Start button with the revised text.

Read more »